Temperature Sensor
There is an internal temperature sensor built into the SmarTemp to moderate optimal performance and temperature accuracy.
The Rotary Knob
This is used to scroll through the menu options.
The Rotary Knob
This is used to scroll through the menu options.
The Rotary Knob
This is used to scroll through the menu options.
LCD Display
The LCD displays all of the heater functions and fault codes.
On/Off Button
Use this to switch the heater on/off.
The Select Button
Use this to select the parameter's displayed on the LCD screen.
Micro Usb port
This pass through is not used on SmartTemp FX.
LED Display Lights
This will illuminate red when the heater is switched on.
When there is a fault they will flash red. The corresponding fault could will be displayed in the LCD display.
LED Display Lights
This will illuminate red when the heater is switched on.
When there is a fault they will flash red. The corresponding fault could will be displayed in the LCD display.
> Main
Control Information
SmarTemp Control fx
General Information
General
> view PDF
Thank you for choosing Webasto to meet your heating needs. The Webasto SmarTemp Control fx enables
you to preset start-up cycles of your Webasto heater 7 days a week with 4 individual times each day.
Compatibility
All Coolant Heaters. The SmarTemp Control fx has an output of 1A for the heaters ON/OFF signal.
Heaters requiring a higher amperage signal will require a relay to accommodate different heater
specifications. See electrical connections for details.
Installation Information
Installation
Technical Information:
– Rated Voltage: 12 / 24V
– Operating Voltage Range: 12V: 11 – 16.V | 24V: 21 - 32V
– Low Voltage Disconnect Range: 12V: 12 – 24V | 24V: 21 - 25.5V
– Operating Temperature: - 40° ... +185 °F (- 40° ... +85 °C)
– Installation Dimensions: (L x H x D) 2.7” x 2.2” x .60” (69.4mm x 55.5mm x 15.2mm)
Drilling Dimensions
Use the dimensions below as a guide when installing and mounting the Webasto SmarTemp fx
Control. Note that this is not a template; the drawing below is NOT to scale.
NOTE: The Webasto SmarTemp Control has an integrated ambient temperature sensor. To ensure
this sensor properly measures the surrounding air, the control must be mounted vertical only.
Operation Information
Operation
> view PDF
The Webasto SmarTemp Control can be operated using a single rotary dial around the outside of the unit
to browse through different menu options. Simply click the select button (
) to make your choice. Thefull operation manual will define each menu item and its default setting.
Webasto Thermo & Comfort Inc, 2013