LCD Display
The LCD displays all of the heater functions and fault codes.
On/Off Button
Use this to switch the heater on/off or if in vent mode switch the fan on/off.
The Select Button
Use this to select the parameter's displayed on the LCD screen.
Micro Usb port
This is a pass through connection to allow a PC interface to communicate to the heater.
LED Display Lights
This will illuminate red in heat mode and blue when in vent mode.
When there is a fault they will flash red. The corresponding fault could will be displayed in the LCD display.
LED Display Lights
This will illuminate red in heat mode and blue when in vent mode.
When there is a fault they will flash red. The corresponding fault could will be displayed in the LCD display.
Temperature Sensor
There is an internal temperature sensor built into the SmarTemp to moderate optimal performance and temperature accuracy.
The Rotary Knob
This is used to scroll through the menu options.
The Rotary Knob
This is used to scroll through the menu options.
The Rotary Knob
This is used to scroll through the menu options.
> Main
Control Information
SmarTemp Control
General Information
General
> view PDF
Thank you for choosing Webasto to meet your heating needs. The Webasto SmarTemp Control enables
you to quickly and effortlessly operate the AT 2000 ST or AT Evo 40 / 55 Air Heaters.
Compatibility
AT 2000 ST - Adaptor harness is needed
AT Evo 40 / 55 – Adaptor harness is needed
SmarTemp Control Instructional Video
Additional Information
Truck Market Brochure
SmarTemp Tri-fold Brochure
Installation Information
Installation
Technical Information:
– Rated Voltage: 12 / 24V
– Operating Voltage Range: 12V: 11 – 16.V | 24V: 21 - 32V
– Low Voltage Disconnect Range: 12V: 12 – 24V | 24V: 21 - 25.5V
– Operating Temperature: - 40° ... +185 °F (- 40° ... +85 °C)
– Installation Dimensions: (L x H x D) 2.7” x 2.2” x .60” (69.4mm x 55.5mm x 15.2mm)
Drilling Dimensions
Use the dimensions below as a guide when installing and mounting the Webasto SmarTemp
Control. Note that this is not a template; the drawing below is NOT to scale.
NOTE: The Webasto SmarTemp Control has an integrated ambient temperature sensor. To ensure
this sensor properly measures the surrounding air, the control must be mounted vertical only.
Operation Information
Operation
> view PDF
The Webasto SmarTemp Control can be operated using a single rotary dial around the outside of the unit
to browse through different menu options. Simply click the select button (
) to make your choice. Thefull operation manual will define each menu item and its default setting.
Webasto Thermo & Comfort Inc, 2013